Powder Coatings Market - Forecast 2022-2027
Powder Coatings Market - Forecast 2022-2027
The Powder Coatings Market size is forecasted to reach US$18.2 billion by 2027 after growing at a CAGR of 6.1% during the forecast period 2022-2027.

Powder Coatings Market - Forecast 2022-2027

Powder Coatings Market Overview
The Powder Coatings Market size is forecasted to reach US$18.2 billion by 2027 after growing at a CAGR of 6.1% during the forecast period 2022-2027. Powder coating is a dry finishing process in which free-flowing, thermoplastic or thermoset powder material is applied to a surface, melted and then allowed to dry and harden into a protective coating. Powder coating based on thermoplastic polymers is derived from polyolefins, polyvinyl chloride, polyvinyl fluoride, polyester and so on whereas thermoset-based powder coatings are derived from epoxy, polyester, acrylic, polyurethanes and so on. Powder coating imparts a high-quality, durable finish, that allows for improved efficiency and is eco-friendly. Powder coatings are based on polymer resin systems. The environmental advantages offered by powder coatings compared to liquid coating methods drives the powder coatings market. The pandemic resulted in shortages of raw materials and supply chain disruptions. According to Echemi, a chemical industry B2B website, there were shortages of neopentyl glycol that is used in many of the resins for powder coatings and triglycidyl isocyanurate which is a curing agent used in polyester powder coatings. This resulted in price hikes of over 60% in the Powder Coatings industry.
Powder Coatings Market Report Coverage
The “Powder Coatings Market Report – Forecast (2022-2027)” by IndustryARC, covers an in-depth analysis of the following segments of the Powder Coatings industry.
By Resin Type: Thermoset (Epoxy, Polyester, Acrylic, Fluoropolymer, Polyurethanes and Others) and Thermoplastic (Polyamide, Polyolefin, Polyethylene, Polyvinyl Chloride, Polypropylene and Others).
By Coating Method: Fluidized Spray, Electrostatic Fluidized Bed, Electrostatic Spray and Others.
By Substrate: Metal (Steel, Aluminum and Others) and Non-Metal (Plastic, Wood, Ceramics, Glass and Others).
By End-Use Industry: Automotive [Two-wheelers (Scooters and Bikes) and Three/Four-wheelers (Passenger Cars, Heavy Commercial Vehicles and Light Commercial Vehicles)], Construction (Outdoor Construction and Indoor Construction), Appliances (Refrigerator, Water Coolers, Vending Machines, Washing Machines, Air Conditioners/Coolers, Electrical Fans, Kitchen Blenders/Mixers, Vacuum Cleaners, Water Heaters, Ovens & Chimneys, LPG Cylinders and Others), Electrical & Electronics (Transformers, Generators, ATM Machines, Industrial/Commercial Systems, Electrical Motor Stators/Rotors, Electric Meters & Connectors, Computer Room Floor System and Others), General Industrial (Industrial Carts & Power Tools, Storage & Racking, Escalators & Elevators, Lockers, Walls & Fittings, Water Pumps, Steel Drums, Pipes & Rebars and Others), Furniture (Outdoor Metal Furniture, Beds & Chairs, Benches and Others), Medical, Transportation & Equipment (Railways, Industrial Transportation, Construction Equipment, Agricultural Equipment, Marine, Aerospace) and Others.
By Geography: North America (the USA, Canada and Mexico), Europe (UK, Germany, France, Italy, Netherlands, Spain, Denmark, Belgium and the Rest of Europe), Asia-Pacific (China, Japan, India, South Korea, Australia and New Zealand, Indonesia, Taiwan, Malaysia and Rest of APAC), South America (Brazil, Argentina, Colombia, Chile and Rest of South America), Rest of the World (the Middle East and Africa)
Key Takeaways
  • The Asia-Pacific region dominates the powder coatings market on account of the increasing construction activities and the recovering automotive industry. According to Invest India, the construction industry in India is expected to reach $1.4 trillion by 2025.
  • There are two types of powder coatings, thermoplastic and thermoset. Thermoplastic powders are commonly derived from polyolefins, polyvinyl chloride and polyvinyl fluoride while thermosetting powders are derived from acrylic, epoxy and polyester resins.
  • Thermoplastic powder coating melts and flows when heat is applied but continues to have the same chemical composition once it cools and solidifies. On the other hand, thermoset powder coatings will not melt when heated after curing.
  • The major opportunity for this market is developing thin-film coatings.
  • A detailed analysis of strengths, weaknesses, opportunities and threats will be provided in the powder coatings market report.
Powder Coatings Market Segment Analysis – by Resin Type
The thermoset segment held a dominant Powder Coatings Market share in 2021 and is expected to grow at a CAGR of 7.2% during the forecast period of 2022-2027. In the powder coating process, as the powder heats and melts it flows around the surface of the object and undergoes a chemical change called cross-linking which forms a hard and durable coating. Thermosetting coatings do not re-melt when they are cooled after heat is re-applied. In its powdered state, thermoset material tends to have a much lower molecular weight than other coating materials, usually requiring less heat to melt, making it more energy efficient. Thermoset powders are commonly derived from epoxy, acrylic, polyester and polyurethane groups. The most frequently employed are epoxy and polyester-based resins. Epoxy resin-based thermoset powders form a tough impact-resistant coating that has excellent corrosion resistance, so they are used for internal applications. Polyester-based coatings have the added advantage of being highly UV resistant, making them an ideal choice for outdoor applications. Thus, the thermoset segment is anticipated to dominate the powder coatings market.
Powder Coatings Market Segment Analysis – by Application
The construction segment held a dominant Powder Coatings Market share in 2021 and is expected to grow at a CAGR of 8.3% during the forecast period of 2022-2027. Powder coating can be used for metal components such as door frames, railings, window frames, fencing, shelters, storefronts, façade or other areas of buildings. According to WSP, around 25% of the overall construction cost is the façade, with the metal contributing a major part of the cost. Powder coating can prevent corrosion and minimize re-coating as it imparts a long-lasting coating. The powder coat is more resistant to scratching, fading, erosion or other types of damage that can ruin the aesthetic appeal of a building The latest trend in the construction industry is low-emitting products and sustainable buildings. According to the U.S. Green Building Council (USGBC), 1,105 projects have been certified with LEED certification for green buildings in the U.S. in 2021. Powder coatings are solvent and VOC-free and produce less waste than other coating methods, making them a clear choice for green buildings. Thus, the construction industry is expected to dominate the market.
Powder Coatings Market Segment Analysis – by Geography
The Asia-Pacific region held the dominant Powder Coatings Market share up to 60% in 2021 owing to the rising consumption of powder coatings from the automotive, construction and appliances sector. The construction activities in the region rebounded after the initial lockdown in 2020. The government of India has made several investments in construction and infrastructure to aid in development. As per a report by the Indian Construction Equipment Manufacturers Association (ICEMA), the construction equipment industry recorded a 47% growth in the second quarter of FY2021-22. According to a news report in Reuters, in FY22-23, US$529.7 billion will be invested to further drive economic growth across the country. China’s construction sector is expanding rapidly. according to the National Bureau of Statistics, China’s construction output is estimated to be worth approximately US$4.3 trillion in 2021. China plans to invest US$1.43 trillion in key construction projects as part of its 14th five-year plan. As per the National Development and Reform Commission (NDRC), the Shanghai plans call for a total investment of US$38.7 billion over the next three years. The Japanese construction industry is expected to boom as the World Expo will be hosted in Osaka, Japan in 2025. Therefore, this region is set to dominate the Powder Coatings market.
Powder Coatings Market Drivers
Environmental Advantages of Using Powder Coatings
Powder coating is the green process of choice for finishing operations. It produces less waste than other finishing processes such as liquid coating. The use of powder coating aids in eliminating waste because, after application, the powder coating overspray can be reclaimed and reused. These types of reclamation practices keep overhead costs low while minimizing environmental impacts. Solvents contain volatile organic compounds (VOCs) which are detrimental to the environment. In liquid coatings, the average VOC content is between 3.5 to 5.5 pounds per gallon, which is approximately one-third to one-half of each gallon of the liquid coating being emitted into the environment during the application process. Since powder coating lines do not require the use of solvents, they do not emit VOCs and can operate with reduced energy, faster curing and lower temperatures. This makes powder coatings highly attractive from an environmental perspective. Innovations in the powder coatings industry strive to make it even better. For instance, in early 2020, Sherwin-Williams General Industrial Coatings division launched the Powdura ECO line made from a resin that uses pre-consumer recycled polyethylene terephthalate (rPET). Thus, the environmental advantages offered by using powder coatings drive the market.
Growing Usage of Powder Coatings in Electric Vehicles
The growth of electric vehicles (EVs) can be attributed to increasing oil prices and growing awareness regarding climate change. According to the International Energy Agency (IEA), in 2021, sales of electric cars (including fully electric and plug-in hybrids) doubled to a new record of 6.6 million. Sales kept rising in 2022 as well, with 2 million electric cars sold worldwide in Q1 2022, up almost 75% compared to Q1 2021. To keep EV motors and batteries operating efficiently, it’s important to maintain an optimum temperature range. Sometimes EV motors can generate operating temperatures that may exceed 200°C. Powder coatings are used to insulate battery boxes and isolate thermal activity. To take advantage of the growing EV market, powder coating manufacturers are launching products that cater to EVs. For instance, in January 2022, Arkema announced high-voltage coating solutions for electric vehicles. The two new polyamide 11 powder coating grades with UL certification were introduced for use in electric vehicle battery systems and other applications. Thus, the growing usage of powder coatings for EVs drives the market.
Powder Coatings Market Challenge
High Initial Investment
The major restraint in the Powder Coatings market is the high initial investment required to set up the powder coating equipment. Liquid coating applications only require a spray gun and a spray area. Comparatively, a powder coating workshop needs a spray gun, spray booth and curing oven. The addition of the curing oven adds significantly to the initial start-up costs for powder coating. The size of the curing oven purchased needs to take into account the maximum part size that can effectively be handled. Larger, thicker and heavier parts require a larger and more powerful oven, which further adds to the overall equipment costs. While metals can be powder coated using electrostatic spray deposition, non-metals require a fluidized bed powder coating application. The need for a fluidized bed also increases the overall equipment costs for the establishment of a complete powder coating facility. This can prove to be a challenge for the powder coatings market.
Powder Coatings Industry Outlook
Product launches, acquisitions and R&D activities are key strategies adopted by players in the Powder Coatings market. The top 10 companies in the Powder Coatings Market are:
PPG Industries
AkzoNobel Powder Coatings
Axalta Coating Systems
The Sherwin Williams Company
Valspar Corporation
Nippon Paint Holdings Co. Ltd.
Kansai Nerolac Paints Limited
Tiger Coatings
For more Chemicals and Materials Market reports, please click here