How to take apart a bissell vacuum cleaner?
How to take apart a bissell vacuum cleaner?
In this article, we will show you how to take apart a Bissell vacuum cleaner - from the handle to the motor - so that you can fix it if it's broken.


If your Bissell vacuum cleaner is giving you trouble, there is a good chance that it can be taken apart and fixed. 

Disassembly of the Bissell CleanView Vacuum

If you're like most people, your Bissell CleanView vacuum cleaner is a powerhouse when it comes to cleaning up pet hair, dust and other debris. But in order to clean it properly, you'll need to take it apart. Here's how:

1) Unplug the Handheld vacuum cleaner.

2) Remove the dirt cup.
3) Remove the brush roll.
4) Remove the bag (if applicable).
5) Remove the belt (if applicable).
6) Remove the filters.
7) Disconnect the power cord from the vacuum cleaner.
8)Remove all of the screws/nuts that hold the parts of the vacuum cleaner together.
9) Clean and lubricate any moving parts as necessary.
10) Reassemble the vacuum cleaner in reverse order.

Cleaning the Filters

Bissell vacuum cleaners come with several filters. The filters can become clogged over time and need to be cleaned. The process of cleaning the filters is simple, but it needs to be done regularly to keep your vacuum cleaner running smoothly.

To clean the filters on a Bissell vacuum cleaner, follow these Vacuum cleaner Supplier steps:

1. Open the lid of the vacuum cleaner and remove all the dirt and debris that has accumulated on the filter.
2. Remove the filter from the vacuum cleaner by prying it off using a fingernail or a small tool.
3. Wash the filter in warm water with a mild soap.
4. Rinse the filter well and dry it off. Replace the filter assembly onto the vacuum cleaner.


image source:

Cleaning the Ducts and Filter Bags

A Bissell vacuum cleaner can be a great help in cleaning your home, but it can also be a pain to take apart and clean the ducts and filter bags. Follow these simple steps to disassemble and clean your Bissell vacuum cleaner:

1. If your vacuum has a crevice tool, use it to loosen dirt and dust from the filters.
2. Open the front cover of the Wet&Dry vacuum cleaner. There is usually a release button or a tab on the side. Use either method to lift up the cover.

3. Loosen the screws that hold on the upper filter bag and remove it from the machine. Rinse it off with water and shake off any excess.
4. Remove the lower filter bag by loosening screws on each end and pulling it away from the machine. Swipe it down with a cloth to remove any dirt or dust particles.
5. Wipe down both filters with a damp cloth and replace them in their respective slots in the upper and lower filters bags. Replace the upper filter bag on top of the lower one, making sure that the screws are tight enough so that no dirt or dust can escape from between them.
6. Replace the front cover of

Checking for and Maintaining Suction

When it comes to your Bissell vacuum cleaner, keeping it in optimal performance is of utmost importance. One way to do this is by checking for and maintaining suction.

Here are a few tips for checking for and maintaining suction:

1. Make sure the vacuum cleaner’s filters are clean. Filters traps dirt and debris before it can accumulate on the motor, which can reduce suction power. Simply remove the filters and rinse them withwarm water if necessary. Be sure to replace them regularly, as they will wear over time.

2. Check the cord for fraying or knots – these can reduce airflow and damage the motor. Try flicking the cord gently with your fingers – if it feelssmooth, there may not be any damage. If there is any breakage or fraying, replace the cord immediately.

3. Clean out any dust or debris that may have collected inside the vacuum cleaner’s intake tubes – this can hamper airflow and cause poor suction. Gently sweep the tubes with a soft cloth or finger before usingthe vacuum cleaner again.
4. Check for blockages in the dust path – this is usually caused by larger


image source:

Putting It All Back Together

Bissell Lift-Off Revolution Pet Hair Cleaner

If your Bissell Lift-Off Revolution Pet Hair Cleaner is giving you trouble, there's a good chance that it's time to take it apart. In this article, we'll show you how to do just that.

First, remove the vacuum cleaner's power cord. Then unscrew screws on the bottom of the machine. Be careful not to lose any screws!

Once the screws are out, lift off the bottom of the machine. You'll now be able to see all of the parts inside.

To put the machine back together, start by reattaching the bottom first. Then put in the screws and screw them in place. Finally, replace the power cord and you're ready to go!