How to troubleshoot common problems with garage roller doors
A garage door is an important part of your home, and it contains multiple components designed to work seamlessly to meet your needs. However, despite how robust a garage door can be, there can be times when it malfunctions, and you may find yourself in a difficult position. Garage roller doors can malfunction for a variety of reasons. As well as being stuck closed or open, making noises, not fully open or closed, frothing while in use, or not responding to the remote button in either direction, the door can become obstructed and jammed.
Listed below are some tips on how to troubleshoot common garage roller doors problems
Check for power
If you do not provide power to the garage roller doors opener motor, it will not work. It might be a good idea to turn the lamp on the opener. You might also want to try plugging something else into the outlet on the opener to see if it works. There may be a problem with the outlet that does not have power, so try resetting the breaker in that area. There is a possibility that the outlet works fine, but your garage door opener is unresponsive. It will need to be repaired or replaced by a professional garage door company like Centurion Garage Doors.
Check your remote control
The problem may lie in your remote if you are having trouble opening your garage door, even though your garage door lamp appears to be working fine. Ensure the remote operates properly by installing fresh batteries and checking for functionality. If the remote doesn't work, try to replace the remote.
Reprogram your remote
In some cases, the garage roller doors remote control may need reprogramming after a battery change. Learning a garage door opener is similar for most of them: hold the LEARN button on the opener for a few seconds or until the LED indicator lights up or flashes when you press it. You should now be able to open the garage door by simply pressing the button on the remote control.
Check sensors of garage doors
If you find that the door does not close properly, the sensor may be obstructed or damaged. Make sure everything is free of dust, obstructions, mud, or debris that may have accumulated on the sensor or that is blocking it. There is a possibility that you may need to replace the sensor with a professional garage door repair company such as Centurion Garage Doors.
Out-of-balance garage doors
If you want the opener unlinked from the door, you will need to close the door completely and then pull the safety cord to unlink it. In addition, you may need to check the springs or adjust the door tracks if it does not open properly, is difficult to lift, or will go back down after letting go after you let go.
Conclusion
Following these basic steps, you can troubleshoot any common problem with garage roller doors. It is, however, a good idea to call a Centurion Garage Doors professional if you need to adjust the door's movement or change the springs on your door. The springs on garage doors are coiled with great force and can be extremely hazardous or even fatal when improperly handled. When troubleshooting garage doors, a professional from Centurion Garage Doors can ensure the job is done safely and correctly.
