It is quite Frustrating to see this Dns_probe_finished_nxdomain error messages on your web browser and you either refresh the web page or you check your internet connection.
Sometimes these most common and most fundamental solutions or methods can be a wonder for you to fix the Dns_probe_finished_nxdomain error, but what if it doesn't?
Even many of you don't know what does it mean and why this happens? You no need to worry now, all your problems will be getting solved and all your queries will be getting answered, just keep patience and read this article carefully.
First, you must know what does this error means. As the name of the error indicates, this problem is when trying to connect to the DNS server, either because the DNS is down or because your Internet connection is not working as it should.
How to Fix Dns_probe_finished_nxdomain?
The first thing you can do to resolve this error, you can do is attempt to change your DNS for others to decide out that the issue is these. To do this, from the IPv4 TCP properties you will change the DNS.
Step 1: Press Windows key and R simultaneously,
Step 2: a window will pop out as the image given below and type a command "ncps.cpl" in the box given, then hit the ok button.
Select the Internet connection which you are connected to, and right-click on it to get into its properties.
Now you can easily see there is a list of different types of connection items listed as you can see in the image below, you have to choose Internet Protocol Version 4 or (TCP/IP4).
A new window appears in which you have to check the box showing"Use the following IP address", after that you can feed all the addresses like IP address, subnet mask, and default gateway into it, which is shown in the image given below. And it should be according to your LAN internet configuration.
As per the given image below, Check "Use the following DNS server addresses", And then Feed the Domain Name System server IP address, which you must have as per your internet service provider or ISP has provided you.
Now you can click on save settings and restart your computer.