![Canon TS6420 printer setup [ Full Solution ]](https://www.fortunetelleroracle.com/upload/media/posts/2021-05/21/canon-ts6420-printer-setup-full-solution_1621592022-b.jpg)
Canon ts6420 printer is one of the leading printers that has been designed by keeping in mind the trend as well as the technical improvements so that it can fulfill the customer expectations. This is not only portable but can be used for both corporate and personal requirements.
So if you have recently purchased the printer and are looking for a Canon ts6420 printer setup then here is a simple process:
So if you have recently purchased the printer and are looking for a Canon ts6420 printer setup then here is a simple process:
Steps for Canon TS6420 printer setup-
Step 1: unpacking your printer as well as connecting with the power cable.
- 1.first and the main step is to unbox your printer by bringing it out from the cardboard box and removing all the excess tape cuttings of the packaging material which is around the printer to provide it safety from getting damage.
- Once you have done it by removing everything then open your power cables and connect one end to the printer and the other to the switchboard in order to establish a power connection and to open the printer as well.
Step 2: Installing and aligning the cartridges
- Open the access door and bring the cartridges out of it.
- Remove the tape which is there on the cartridge and pay attention to it that you do not touch the cartridge nozzle because if you will touch it may get damaged and there can be problems in the process of printing. Once you remove all the tape or the plastic which is covering the Ink cartridges inserted them properly into their slots and fix them to initiate the proper flow of ink within the printer.
- Also, make sure to align the cartridge in the printer because if the Ink cartridges will not be aligned properly the printouts may get faded, or there we know colors on the paper or it can even throughout the paper without printing it.
Step 3: Loading the printer
The next step is to put a bundle of paper into the printer so that it can start printing was the command is given. The paper should be wrinkle-free and it should be fresh to avoid any problem in the process of printing.
Step 4: Downloading the software
The last step is to download the driver software on your device. For that :
- Put the CD into your device and then tap on the option to run the file MSETUP4.EXE.
- Then the setup process will begin.
- Follow all the on-screen instructions and tap on yes to terms and conditions on the license agreement to move further.
- Once the installation process is completed tab on next.
- Now select your USB connection and click on next.
- Now make sure that your computer is connected to your printer through the USB cable.
- As the printer driver will get installed it will check the printer is linked and then tap on Next.
- Tap on it executes in order to have a test printing task or you can either tap on next if you want to skip this.
- Follow all the prompt instructions tap on continue.
