LED Strips: Should you buy them or not | led strip lights
LED Strips: Should you buy them or not | led strip lights
LED lighting can produce lighting with better energy competence ratings, but is it greener? Evaluation of the pros and cons of LED lighting is discussed here.

LED lighting can produce lighting with better energy competence ratings, but is it greener? Evaluation of the pros and cons of LED lighting is discussed here.

Should you buy LED lighting or Not

Lights and lighting are an integral part of our daily lives, and almost every aspect of our daily work requires light. With the growing environmental protection awareness, the lighting industry has made great strides, and LEDs are just one of those strides. LED lighting is highly known for its energy efficiency, making it a major selling point in the industry. LED lighting has pros and cons, and it’s good to understand before switching to this type of lighting.

What is LED lighting?

LED lighting is a form of lighting that uses lead light-emitting diodes to convert electrical energy into light.

Vector Digitizing

LED lamps and bulbs can be used everywhere: homes, offices, industries, and vehicles. This article examines the pros and cons of LED lights and how they affect our daily activities. LED lights can be easily and efficiently used in homes with LED extrusions. Advantages and disadvantages of LED lighting

Here, we review the various components of LED lighting, including pros and cons, harmful effects, and pros and cons analysis.

Advantages of LED lighting

Using LED lighting has many advantages, included:

1. Energy consumption efficiency

LED lighting lamps and light sources save a lot of energy. LED lamps are estimated to use 80-90% more energy than traditional fluorescent and incandescent lamps. The energy efficiency of a lighting solution is measured using two statistics: effective lumens or luminous efficacy. LED lights convert about 95% of the total energy into light and the remaining 5% heat. In contrast, conventional fluorescent lamps convert only 5% to light and the remaining 95% to heat.


This means that very less energy is required to light an LED lamp than fluorescent or incandescent lamps. In practice, a 36-watt LED replaces an 84-watt fluorescent.

Using less energy means your monthly electricity bill will also be significantly reduced. This also means less power demand for domestic power plants, leading to lower greenhouse gas emissions.

2. No harmful ingredients

Other lighting methods, such as mercury lamps and fluorescent lamps, contain toxic substances such as mercury, which LEDs do not. Such materials can cause severe landfill waste contamination

LED lights significantly reduce waste disposal by B. registered waste haulers.


Complying with disposal regulations can be time-consuming and costly, which can be avoided by using safer LED light sources. It also means that you have protected the environment by avoiding toxic substances.

3. Enhanced security

LED lights are a lot safer to use as compared to other types of lighting. Other means, such as fluorescent and incandescent lamps, convert the largest percentage of total energy into heat. Regarding lighting, heat emission is the first and biggest danger. Fluorescent lights dissipate about 95% of their energy as heat, while LED lights dissipate only 5% of their energy as heat. This is much lower, allowing LEDs to operate efficiently in low voltage systems.

Low voltage systems are also much safer in case of failure.

Disadvantages of LED lighting


1. Purchase price

Despite the many benefits of LED lighting, some people are hesitant to purchase it due to its high initial cost. Although LEDs have been slowly decreasing over the years, it is still expensive for some people.

For example, standard LED lamps range in price from $10 to $40. This is much higher than incandescent and CFL bulbs, which are $3 to $5 each. LEDs are cheaper in the long run, but the initial cost difference may deter many people from switching from traditional incandescent bulbs.

People are fascinated by its long lifespan, which saves money over time. In a microgrid scenario, an entire warehouse can be retrofitted and moved completely behind the counter.

2. color limit

LEDs have problems producing white light. Diodes of different colors are used to create white light. White light is produced when all the diodes are lit simultaneously.

The intended white light was often bluish due to many different colored diodes. As the LEDs in the lamp start to degrade, so does the color quality, giving off bad colors.


3. Temperature

LED lighting is generally sensitive to ambient temperature levels. The efficiency of LED lamps directly depends on the temperature level.

High ambient temperature will affect the proper functioning of the LED lamp. A heat sink is required to function properly and prevent lamp failure.

Bottom line

Buying LED strips is fun, but at the same time, you have to keep these advantages and disadvantages in mind and then decide whether you want them or not. Buying anything to illuminate your house or room is totally up to you, so it’s better to choose efficiently.