Fall produces some of the most common months for hurricanes, especially September and early October. Historically, this is around the time when most tropical storms make landfall or grow big enough to become named storms. What does this mean for your job site? When you get an alert that a hurricane is approaching, there are specific steps you can take to prepare. From removing your water bladder tank and other supplies to turning off the utilities, here are the steps you should take when you receive a hurricane warning at your construction site.
Remove All Essential Equipment and Gear
It’s always difficult to predict the amount of damage that an approaching storm might cause. That’s why it’s better to err on the side of caution. You don’t want to lose your essential equipment and set your project back even further. Gear like your water bladder tank, power tools, machinery, and electronics can all be damaged by wind, rain, flooding, and debris. Properly store this equipment and transport it away from the site to a safer location.
Secure All Loose Materials and Supplies
With winds blowing through and the potential for flooding, it can be easy for any loose materials to get swept away. One day you have all the nails, wood, and drywall you need, and the next, it’s all gone. There are two ways your construction team can prevent this from happening. First, you could carry these materials and supplies off-site with the rest of your essential equipment. This idea can work if you have the storage space and available personnel to transport it all. If you’re looking for an alternative to moving everything, you can secure it all on-site. If you gather everything together and secure your materials on high ground or tie them to permanent structures, you can keep it all safe and in one location.
Turn Off All Utilities
As the storm approaches, you want to ensure all the utilities are turned off at your job site. Water, electricity, and gas should be shut off before the storm hits. It is important for the safety of your site and your team members that you make sure these are properly shut down. That way, no existing connections are damaged and can’t contribute to any unexpected clean-up as a result. After the storm has passed, you can get the utilities back up and running.
After the Storm, Assess the Damage
Just because the storm is over doesn’t mean you can immediately get back to work like normal. Assessing the aftermath is almost as important as the steps you take in preparation for the storm. First, you want to check for any hazards or chemical spills. Check for new holes created by the storm that might cause an injury. If you find a chemical leak, set up your spill containment berms immediately. With so much water, a spill like this can quickly expand and affect the surrounding area. Get it contained as soon as possible, address the source of the leak, and contact any supervisors or authorities who need to be aware. Then, you can properly address the spill and get your job site up and running as soon as possible.
About AIRE Environmental
AIRE Environmental, formerly known as AIRE industrial, is an industry leader in the spill containment, water storage, and flood containment industries for good reason. All their products are specifically engineered to meet and exceed industry standards. Headquartered in Meridian, Idaho, AIRE Environmental is proud to provide products designed and manufactured in the USA. Whether you need spill containment berms or a water storage bladder, AIRE Environmental has you covered. They use only the highest-grade materials and expert fabrication methods. Don’t see a product that meets your needs? They also offer custom orders, so their expert team can create a solution made to your exact specifications. AIRE Environmental helps you and your team stay ready for any situation you might encounter, from spills to natural disasters and everything in between.
For your storm preparation needs, check out the products at https://www.aireenvironmental.com/
Original Source: https://bit.ly/3Ce1FeM
