sublimated jerseys
As you work toward coming to be an experienced dye-sublimation printer to make SUBLIMATED JERSEYS, you might come across one or more barriers such as your transfer coming out blurred, boring or faded. Don't obtain dissuaded! This is all part of the knowing process, and also a lot of our brand-new sublimation customers undergo a trial and error period. We've compiled several of the most frequent problems related to dye-sublimation printing in case you ever experience one.
Why aren't my transfers appearing vibrant?
There are a couple of reasons why your transfers could be coming out much less dynamic than anticipated. First, make sure that you are printing on the proper side of your sublimation paper, which is generally intense white. The opposite side is usually beige. If you're publishing with a Sawgrass Virtuoso SG400 or SG800, the intense white side will load face-down in the tray. Next off, guarantee that you are publishing via the correct color modification program.
Why is my image ghosting?
If you are seeing a second version of your transfer, like a shadow, somewhat to the side of your photo on SUBLIMATED JERSEYS, you are experiencing what is called ghosting. Ghosting occurs when the sublimation transfer paper changes throughout the sublimation procedure, such as when you open or close your warm press. Because of this, it is advised that you tape down your hard substratums to the sublimation paper utilizing thermal tape. For materials, we recommend a sticky spray to prevent the paper from moving. After pushing, make certain you get rid of the transfer paper promptly. For sublimation, we also suggest preventing utilizing an automobile open press as these have a tendency to stand out open as well quick, triggering the paper to move if not taped down well enough.
Why is my substrate declining sublimation ink?
It is important to keep in mind that not all items approve sublimation ink. For dye-sublimation to function, your product empty requirements to have a polyester covering (or be made of a polyester material).
For fabrics, we advise 100% white polyester for the best transfer of SUBLIMATED JERSEYS. It is not feasible to sublimate on 100% cotton-- and also your transfer will remove in the initial laundry cycle. You can sublimate on poly/cotton blends, but the transfer will appear much less vivid as well as give a vintage look. In general, the higher level of polyester, the much better.
Why am I getting ink from a previously transferred picture onto a new empty transfer?
Sublimation ink has the propensity to bleed onto all-time low and leading platens of your press during warmth transfer, which is why it is extremely vital to safeguard your press with the correct product. To avoid ink from getting onto your leading or bottom platen, we suggest utilizing a Teflon cover for every platen, as well as a Teflon sheet. Teflon is entirely reusable, and all it takes is cleaning away the excess ink after each press. You might also use silicone-treated sheets that can be discarded after use.
Why am I seeing little dots in my transfer?
If you're noticing little dots on your completed SUBLIMATED JERSEYS, this is likely as a result of excess dampness. We advise pre-pressing most substrates to guarantee you get all wetness out. Then, allow the substratum cool down, place your transfer on, and press like normal.
Why are my transfers fuzzy?
If you observe obscuring in your photo when you pull the transfer paper off, this might be due to the fact that your substratum obtained way too much time/temperature in the warmth press, as well as now the photo has actually begun to bleed out. If this takes place, we suggest minimizing your time and attempting once more
Why are my photos appearing faded?
Image fading is generally triggered by way too much time and temperature, and/or stress. We recommend ascertaining the suggested settings from the business where you purchased your sublimation spaces. Every warm press is different, which is something to bear in mind. Another pointer is to verify the temperature of the top platen on your press to make sure it lines up with the specified temperature; for this, we suggest warm strips.
