menu
Changing Filters on Sanitaire Commercial Vacuums
Changing Filters on Sanitaire Commercial Vacuums
On the underside of the casing is the HEPA combustion regulator SC9180B. Push the rigid tab back on top and detach it from the casing to remove it. The filter can be cleaned.

·        SanitaireSC9180B Commercial Upright Vacuum Cleaner

On the underside of the casing isthe HEPAcombustion regulator SC9180B. Push the rigid tab back on top and detach it fromthe casing to remove it. The filter can be cleaned. We suggest that you scatterits plates to extract soil from the grindings for the best cleaning possible.

If it has cooled (we suggestlasting for twenty-four hours before removing the membrane, just to be secure),slip the filtration system firmly in order. Install the lower portion of thefilter into the openings and force the filter in the direction of the dwellinguntil it clips into position. It can help to keep the plastic tab back till theremainder of the container has been relocated to its position.

To view the SC9180B enginefilter, unlock the bag container and detach the bag. This can be achieved whilethe power supply is already wrapped from around the house.

The engine filter is situated atthe base of the bag cavity. It's fixed in place by a polymer frame. Disable thefilter and wash it or adjust it as appropriate. Change the filter with thepanel side down after it's been settled for 24 hours. This will press wheneverit's back in the right place.

·        SanitaireSC5845B Bag-less Upright Vacuum Cleaner

The SC5845B's emissions cleanercan be found on the side of the housing, much like the SC9180B. Push down theplastic tab to drop it and draw it towards you. The filter is easy to clean. Wesuggest that you wait twenty-four hours after cleaning before removing it.

When the opportunity arises, slipthe pins of the combustion filter into the two ports at the base of the frameworkand drive the edge of the filter away from you. For better fit, keep down theplastic stub on top of the filter and reduce the pressure until it has slippedinto location.

Take the dust container from thefront of the case to adjust the engine buffer of the SC5845B. Spinoff the edge of the dirt container to reach the conical filter within.

From the debris bag, remove theengine filter. Before removing it, we suggest waiting twenty-four hours aftercleaning the filter. When it's totally dry, slip it back into place andreconfigure the dirt container.

Through daily filter servicing, we are sure thatyour Sanitairevacuum cleaner can give you efficient cleaning capacity every day. Ifyou have any further concerns about the care of your SC9180B, SC5845B or anySanitaire commercial vacuum cleaner, please feel free to contact (866)972-8227.