Ball float steam trap manufacturer in USA
Valvesonlyis a BallFloat Steam Trap Manufacturer In USA. Mechanical traps, such as Ball Float SteamTraps, are a type of mechanical trap. They work by using the density differencebetween steam and water. A lever connects a ball float to the valve and seat.When the condensate within the trap reaches a certain amount, it will bedischarged. Condensate is constantly discharged. Ball Float Steam Traps may beused in any process application where condensate must be extracted as soon asit forms, such as all types of heat exchangers, tank and unit heaters, andothers. Thetype GC1 is specifically designed for applications in the food, pharmaceutical,and other industries that require stainless steel bodies and small condensateloads. It can also be used to drain the main lines of steam.
· Bodymaterial: Carbonsteel, cast steel (WCB, WCC, LCC, WC6, LCB, WC9), stainless steel (SS316,SS304, CF8), ductile iron.
· Class: 150 to 2500.
· Size: ¾” - 4”.
· Ends: Socket weld butt weld,flanged, threaded.
· Operation: lever, electric, pneumatic actuated.
The thermostatic air ventrapidly discharges air during start up (membrane or bimetal type). The steamtrap body is filled with cold condensate. The float rises and opens the valvewhen a certain water level is reached. The open valve and the open air vent areused to discharge the cold condensate. The air vent shuts when the condensatereaches saturation temperature, and the condensate is only discharged throughthe main valve orifice. Inside the trap body, the condensate forms a waterseal, preventing live steam loss at all times.
The water level withinthe trap body controls the valve's opening degree. Condensate is constantlydischarged. The temperature cools slightly as air reaches the trapand accumulates at the top of the trap body, and the air vent, which opensslightly below saturation temperature, starts to discharge the air from thetrap.
FEATURES
· For a long and trouble-free service, alltraps are fitted with stainless steel wear and corrosion resistant float,lever, valve, and seat systems.
· Each ball float steam trap has an air ventthat allows air and gases to escape during start up and operation.
· All traps are made to be simple to cleanand maintain.
The difference in densitybetween steam and condensate is sensed by the ball float style trap. Since thevalve is still flooded, neither steam nor air may pass through it, early trapsof this kind relied on a manually operated cock at the top of the body tovent.
For more details visitour website;
https://valvesonly.com/product-category/ball-float-steam-trap/
