Air Compressor System
Noise While in Use
Your machine may need some repairs if it produces a loud sound constantly. It is possible for a high noise to be caused by an error in its belt, flywheel, pulley, or cooler. Add enough oil to its crankcase and tighten these spare parts.
Inlet Valve Is Blowing Air
When air is blowing out of the inlet valve, this could indicate that the valve has been damaged. Check the air compressor's auto drain valve and replace the old valve assembly if necessary.
Insufficient air pressure
There won't be enough pressure if there is a leak in the compressor system. Make sure the hose or piping is in good working order. A simple mechanical fault can be fixed by replacing the air filter.
An out-of-alignment pulley may result in excessive belt wear. A professional air compressor repair agency can help you. Aligning the pulley with the flywheel can make your compressor work more efficiently. Professionals can adjust the belt according to the severity of the problem.
Fuse blowing recurrently can indicate a serious problem with the fuses in the machine. The fuse you install in the machine should be of the appropriate ampere and rating. When there is a problem with low voltage or a mechanical fault with the valve, you need to replace it.
You should act quickly and have your complex air compressor system troubleshot and inspected by an expert. Professionals will also perform maintenance to prevent mechanical problems from recurring.
